pyrolysis plant

Plastic to oil converter?

2018-03-27 17:18:25 Pyrolysis Plant FAQ
plastic to oil
Plastic to oil converter machine

Plastic to oil converter machine is a kind of the most promising resources for fuel production.Plastic to oil converter machine of plastic yield s on average 45-52% of fuel oil ,30-35% carbon black ,10-15%steel wire and 10% gas ,depending on the pyrolysis technology.

The use of plastics has been associated with signficant environmental problems due to their continuous accumulation is landfills,as plastic waste does not degrade or degrades at a very low pace.

Plastic to oil converter?
plastic to oil machine
Plastic to oil converter machine

1. Put pre- processed plastic into the reactor by full-automatic feeding machine(taking the plastic to oil converter machine) after they are delivered into stock bin by conveyor belt. Total quantity shall be controlled under 2/3 of reactor for rotating more smoothly. Then close the feeding door and open the heating system.

2. Two stages are included for plastic pyrolysis process. From 100 ℃ to 250 ℃ is the preliminary stage , and the oil gas shall be released at 200 ℃  . From 280 ℃ to 350 ℃ is the top output rate interval. Oil gas will be collected into manifold, and the heavy particles and oil will be gathered and liquefied in center of manifold and drop down into the heavy pyrolysis oil tank. The lighter gas will rise up to the multi-functional oil condensers, then be liquefied into oil and stored in the oil tank. The incondensable gas through desulfuration and de-dusting by hydroseal will be led to the furnace for heating.

3. Cool down the reactor after making sure all above mentioned have been done. The carbon black will be discharged when the temperature reaches at 40 ℃. The end products you can get from the waste tyre to oil process are plastic pyrolysis oil, carbon black and combustible gas.

Pyrolysis oil (tire oil/plastic oil)
converter plastic to oil
Fuel oil application
1. Add it into heavy oil generator to produce electricity. 
2. Used as heating material.  
3. Sell it into oil refining factory to further process it.  Ceramic factory, glass factory, electric power factory, steel making factory, boiler factory…etc.

Leave A Message About FAQ

Send message