pyrolysis plant

Tyre to fuel oil production process ?

2018-04-04 10:43:17 Pyrolysis Plant FAQ
tyre to fuel
Tyre to fuel oil process
According to statistics, at present the backlog of global auto waste tyre has amounted to 3 billion, a year is growing at a rate of 1 billion. The accumulation of a large number of waste tyres not only takes up land, environmental pollution, harm residents’ health, this is a kind of harm more and more "black pollution", so, how to deal with the waste tyre? We look at how to deal with waste tires in various countries.

Henan Doing produced tyre to fuel oil production process plant adopts pyrolysis recation that convert waste tyre to fuel oil ,carbon black and steel wire.

Tyre to fuel oil production process ?
tyre to fue oil production process
Tyre to fuel oil production process working process

1) Put the waste tyre into reactor and make reactor rotate clockwise 0.4-0.8 r/min. Seal the feeding inlet door tightly and make sure there is no gas leakage.

(2) Heat the reactor by using coal, charcoal, fuel gas, wood etc. as heating materials. The reactor will be slowly heated, and when the temperature reach about 250 degrees, the oil gas will be formed.

(3) The oil gas coming out from the reactor then goes to condensing system and become liquid oil. The gas which can’t be liquefied under normal pressure will be designed to go back to combustion system through safety device. It can be recycled to heat the reactor as fuel, which will save energy for the whole working process.

(5) After finishing oil production, the temperature of pyrolysis reactor will fall down, when the temperature falls down to 40 degrees Celsius, we can get carbon black and steel wire.

Leave A Message About FAQ

Send message