The waste plastic pyrolysis to oil plant is a kind of environmental protection product that can convert the waste plastics to the useful fuel oil, which adopts the new green technology. Not only the oil produced by the waste plastic pyrolysi...
Waste plastic pyrolysis to oil
Waste plastics are indispensable materials in the modern world and the application in the industrial field and daily life are continually increasing. Nowadays, the waste plastics are receiving the renewed interests.
What is pyrolysis:
Pyro = heat. Lysis = break down.
Pyrolysis is chemical reaction. This reaction involves molecular breakdown of larger molecules into smaller molecules in presence of heat. Pyrolysis is also known as thermal cracking, cracking, thermolysis, depolymerization, etc
Waste plastic pyrolysis to oil plant
The waste plastic pyrolysis to oil plant is a kind of environmental protection product that can convert the waste plastics to the useful fuel oil, which adopts the new green technology. Not only the oil produced by the waste plastic pyrolysis to oil plant can be used as the industrial and civil gasoline, diesel and even the fuel oil, but also the waste plastic pyrolysis to oil plant can be friendly to the environment because of recycled or recovered use of the waste plastic.
DY-6T capacity waste plastic pyrolysis to oil plant (D2200mm*L6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.
DY-8T capacity waste plastic pyrolysis to oil plant (D2200mm*L6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts Q245R steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material Q245R, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.
DY-10T capacity waste plastic pyrolysis to oil plant (D2600mm*L6600mm)
1. Working with Auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 Celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by DOING waste plastic pyrolysis to oil plant as an example:
|2600*6600||2 hr||10 hr||2-3 hr||2-3 hr||16-18 hr|
Oil rate of different plastics:
Approx oil yield rate of different raw material
Leftovers of paper Wet 15-20%, dry 60%
House garbage 35-50%
Plastic cable 80%
Plastic bag 50%
Submarine cable 75%
Rubber cable 35%
PVC Not suitable
PET Not suitable
|Technical parameter of 6/8/10T capacity waste plastic pyrolysis to oil plant|
|2||Raw material||Waste plastic||Waste plastic||Waste plastic|
|3||Structural form||Horizontal rotation||Horizontal rotation||Horizontal rotation|
|4||24-hour Capacity||6 ton||8 ton||10 ton|
|5||Oil yield||2.7-3.3ton||3.6 -4.4ton||4.5 -5.5ton|
|7||Material of pyrolysis Reactor||Q245R||Q245R||Q245R|
|8||Thickness of pyrolysis Reactor||16mm||16mm||16mm|
|9||Rotate speed of pyrolysis Reactor||0.4turn/minute||0.4turn/minute||0.4turn/minute|
|11||Mode of cooling||Water cooling||Water cooling||Water cooling|
|12||Cooling area of condenser||100sqm||100sqm||100sqm|
|13||Kind of transmission||Internal gear drive||Internal gear drive||Internal gear drive|
|15||Size of Reactor(D×L)||2200×6000||2200×6600||2600×6600|
|16||Working form||Intermittent operation||Intermittent operation||Intermittent operation|
|Prepared by customer about 6/8/10T capacity waste plastic pyrolysis to oil plant|
|3||Natural gas(for choice)||100-150kg/day|